PEINER SMAG HHG 2000.33

الشركة المصنعة

PEINER SMAG

بلد

Germany

رقم القطعة

HHG 2000.33

الوصف

PEINER Hydraulic Timber Grab in accordance with specification sheet no. FD 20.233 suitable for being attached to a hydraulic excavator with an operating weight of 30 - 60 t and a lifting capacity of 6,8 t (at a log length of 3 m) resp. a lifting capacity of 10,7 t (at a log length of 6 m) suitable for handling timber logs with a piled density of 0,8 t/m3 with a log length of 3 - 6 m loading space cross section: approx. 2,0 m2 max. lifting capacity: 10,0 t max. log length: 6 m tongs width: 800/640 mm dead weight: approx.2435 kg equipped with a hydraulically actuated rotator (max. operating pressure 250 bar) and 2 cylinders (max. operating pressure 320 bar) Payload calculation at a log length of 3 m cross section (2,0 m2) x log length (3,0 m) x piled density (0,8 t/m 3 ) : approx. 4800 kg ./. 20% reduction (approx., for the space between the logs) : approx. - 960 kg + dead weight of the grab : approx. 2435 kg ----------- = total payload : approx. 6275 kg Payload calculation at a log length of 6 m cross section (2,0 m2) x log length (6,0 m) x piled density (0,8 t/m 3 ) : approx. 9600 kg ./. 20% reduction (approx., for the space between the logs) : approx. - 1920 kg + dead weight of the grab : approx. 2435 kg ----------- = total payload : approx. 10115 kg Grab equipped without a suspension paint : grab : RAL 7038 (grey) protection plates : RAL 5010 (blue)